The CSL DD/GT DD Pro require Spacer Plates to be installed. These are often forgotten during assembly. They are small rectangular plates with two holes in each. These get mounted between the steel plate that connects to the Steering Uprights and the
No! Our Chassis are made to be very tight to eliminate any flexing. To remedy this issue, simply loosen the bolts holding the Steering Uprights to the 50” Aluminum Profile base of your Chassis. This should give you the needed play to fit your Wheelba
No. Instead of forcing the bolt in, try threading it in before installing the piece that is going to be held by the bolt. Sometimes, residue from the powdercoating process finds its way in the threads and makes it difficult to turn the bolt on the fi
On the Triangle Support Plates, locate the hole that is larger than the other two. This is where the Caster will go. Assemble the parts in the following order, from bottom to top. Put the shaft attached to the Caster Wheel through the larger hole on